x86 Instruction Set Reference

ORPS

Bitwise Logical OR of Single-Precision Floating-Point Values

Opcode Mnemonic Description
0F 56 /r ORPS xmm1, xmm2/m128 Bitwise OR of xmm2/m128 and xmm1.
Description

Performs a bitwise logical OR of the four packed single-precision floating-point values from the source operand (second operand) and the destination operand (first operand), and stores the result in the destination operand. The source operand can be an XMM register or a 128-bit memory location. The destination operand is an XMM register.

Operation
Destination[0..127] = Destination[0..127] | Source[0..127];
SIMD Floating-Point Exceptions
None.
Protected Mode Exceptions
#GP(0)For an illegal memory operand effective address in the CS, DS, ES, FS or GS segments. If a memory operand is not aligned on a 16-byte boundary, regardless of segment.
#GP(0)For an illegal memory operand effective address in the CS, DS, ES, FS or GS segments. If a memory operand is not aligned on a 16-byte boundary, regardless of segment.
#SS(0)For an illegal address in the SS segment.
#PF(fault-code)For a page fault.
#NMIf TS in CR0 is set.
Real-Address Mode Exceptions
#GP(0)If a memory operand is not aligned on a 16-byte boundary, regardless of segment. If any part of the operand lies outside the effective address space from 0 to FFFFH.
#GP(0)If a memory operand is not aligned on a 16-byte boundary, regardless of segment. If any part of the operand lies outside the effective address space from 0 to FFFFH.
#NMIf TS in CR0 is set.
Virtual-8086 Mode Exceptions
Same exceptions as in Real Address Mode
#PF(fault-code)For a page fault.
Instruction Latency Throughput Execution Unit
CPUID0F3n/0F2n/069n0F3n/0F2n/069n0F2n
ORPS xmm, xmm4/4/22/2/2MMX_ALU